PhD Candidate
Project:ĚýRepair of Thermoplastic Composites
ĚýĚýjulieta.barroetarobles [at] mail.mcgill.ca (Mail)
Supervisor: Prof. Pascal Hubert
Ěý
Thermoplastic composite materials are often the material of choice due to their high fracture toughness, high strength-to-weight ratios, impact resistance and fatigue performance when compared to their metallic and thermoset composite counterparts. In addition, they can be melted, re-melted, and reprocessed. It is due to these advantageous properties that the industry has the interest to use these materials in aerospace applications. However, to fully take advantage of these materials and to expand their utilization, a methodology is necessary to repair thermoplastic composite structures. By doing so, it would be possible to make the entire product life cycle more cost-effective and sustainable by repairing a component rather than fully replacing it. In addition, if a part could be repaired on the field, it would be possible to diminish down-time.
Ěý
Ěý
Publications
Thermoplastic Composite Repair
Barroeta Robles, J., Dubé, M., Hubert, P., Yousefpour, A. “Repair of thermoplastic composites: an overview”. Advanced Manufacturing: Polymer and Composites Science. Vol 8 (2), 68-96. Jun 2022
Barroeta Robles, J., Guthrie, A., Dubé, M., Hubert, P., Yousefpour, A. “An approach to the repair of thermoplastic composites using resistance welding with a hybrid heating element”. From May 23rd to May 26th, 2022, SAMPE, Charlotte, NC, USA. Presented by Julieta Barroeta Robles
Bio-inspired Ceramic Structures
Rahimizadeh, A., Yazdani Sarvestani, H., Barroeta Robles, J., Gholipour, J., Ashrafi, B. “Biomimetic bi-material designs for additive manufacturing“, Bioinspiration and Biomimetics, 17(4), 2022
Rahimizadeh, A., Yazdani Sarvestani, H., Li, L., Barroeta Robles, J., Backman, D., Lessard, L., Ashrafi, B. “Engineering Toughening Mechanisms in Architectured Ceramic-Based Bioinspired Materials”. Journal of Materials and Design. 198 (109375) January 2021
Resin Transfer Moulding of High Graphene Content Composites
Barroeta Robles, J., Hong, L., Palardy-Sim, M., Robertson, T., Moghimian, N., Ashrafi, B. “Processing and Properties of High Content Graphene-Enhanced Glass Fibre Composite as Battery Retainer Materials”., Composite Structures. Vol 257(12) July 2021
Barroeta Robles, J., Palardy-Sim, M., Yousefpour, A., Moghimian, N., Ashrafi, B. “Resin Transfer Moulding Processing and Properties of Graphene-Enhanced Glass Fiber Laminate Composite”. NATO AVT-304 Specialist Meeting NATO, October 10th and 11th., 2019, Trondheim, Norway.
Barroeta Robles, J., Palardy-Sim, M., Hong, L., Octeau, M.A., Yousefpour, A., Moghimian, N., Ashrafi, B. “Material Characterization of Graphene Enhanced Composites for Resin Transfer Moulding”., From July 22nd to July 25th, 2019, Canadian International Conference on Composites (CANCOM), Kelowna, BC, Canada – Presented by Julieta Barroeta Robles
Resistance Welding
Palardy-Sim, M., Barroeta Robles, J., Octeau, M-A., Roy, S., Guthrie, A., Ferland, F., Yousefpour, A., Forghani, E., Atkinson, S., Nesbitt, S., Gordnian, K., Vaziri, R., Poursartip, A., Endrass, M., Larsen, L., and Kupke, M. “Towards Robust, Non-Application Specific, Continuous Resistance Welding”., From July 11th to July 15th, 2022, Canadian International Conference on Composites (CANCOM), Fredericton, Moncton, NB, Canada
Endrass, M., Thissen, S., Jarka, S., Octeau, M-A., Palardy-Sim, M., Barroeta Robles, J., Larsen, L., Yousefpour, A., Kupke, M. “Towards Continous Resistance Welding for Full-Scale Aerospace Components” From September 30th 2020 to October 1st, 2020. Amsterdam, Netherlands.
Additive Manufacturing
Barroeta Robles, J., Wanjara, P., Cole, R. G., Sanchez, F., Spineanu, A., Chkafi, A., Gholipour, J. “Mechanical evaluation of additively manufactured composite materials fabricated using MarkForged X7”., From July 11th to July 15th, 2022, Canadian International Conference on Composites (CANCOM), Fredericton, Moncton, NB, Canada - Presented by Julieta Barroeta Robles
Real Time Inspection of Composite Structures
Rivard, M., Palardy-Sim, M., Lamouche, G., Roy, S., Padioleau, C., Beauchesne, A., Levesque, D., Boismenu, F., Dicaire, L-G., Boisvert, J., Peters, S., Chen, J., Octeau, M-A., Barroeta Robles, J., Ferland, F., Tanguay, M., Hissett, M., Swope, D., Albers, S., Harper, R., Wright, K., Buhrkuhl, B., Klakken, M., Lund, G., Yousefpour, A., ”Enabling Responsive Real-Time Inspection of the Automated Fiber Placement Process”., SAMPE 2020 Virtual Presentation Series Manufacturing Technology. May 2020.
Palardy-Sim, M., Rivard, M., Lamouche, G., Roy, S., Padioleau, C., Beauchesne, A., Levesque, D., Dicaire, L-G., Boisvert, J., Peters, S., Chen, J., Octeau, M-A., Barroeta Robles, J., Hissett, J., Swope, D., Albers, S., Harper, R., Wright, K., Buhrkuhl, B., Klakken, M., Lund, G., and Yousefpour, A. “Advances in a Next Generation Measurement and Inspection System for Automated Fibre Placement”., From September 23rd, 2019 to September 26th, 2019, CAMX, Anaheim, CA, USA.
Composite Materials for Space Applications (Master’s Degree)
Barroeta Robles, J., “A Streamlined Characterization-Based Selection of Composite Material Systems for Space Structures”, 2017, Ď㽶ĘÓƵ Master’s Thesis, Montreal, QC, Canada.
Barroeta Robles, J., Hubert, P. “Dimensional Stability Assessment of Spacecraft Structures Using Process Models from Material Characterization”, From May 21st to May 24th, 2018, SAMPE, Long Beach, CA, USA. - Presented by Julieta Barroeta Robles
Barroeta Robles, J., Rousseau, C., Hubert, P. “Material Characterization to Evaluate the Suitability of Out-of-Autoclave Semipregs for Structural Space Applications”, From July 17th to July 20th, 2017, Canadian International Conference on Composites (CANCOM), Ottawa, ON, Canada – Presented by Julieta Barroeta Robles and obtained 1st place Professor Suong V. Hoa Student Paper Award
Controlled Strength Bonded Joints for Non-Destructive Inspection Evaluation
Barroeta Robles, J., Cole, R.., Sands, J.M. "Development of Controlled Adhesive Bond Strength for Assessment by Advanced Non-Destructive Inspection Techniques", From May 17th, 2010 to May 20th, 2010, SAMPE, Seattle, WA, USA.
Barroeta Robles, J., Cole, R., Sands, J.M. “A Novel Approach for Generation of Adhesive Bonds with Controlled Bond Strength”, From Sept 20th, 2010 to Sept 23rd, 2010, ASC 2010, Dayton, OH, USA.
Boustie, M., Gay, E., Berthe, L., Arrigoni, M., Radhakrishnan, J., de Résspeguier, T., Perton, M., Blouin, A., Monchalin, J.P., Barroeta-Robles, J., Johnston, A., Cole, R., Buzaud, E. “LASAT of composite materials for aerospace industry”, From Nov 2nd, 2010 to Nov 5th, 2010, SMT23, Mamallapuram, Chennai (Madras), India.
Gay, E., Berthe, L., Boustie, M., Arrigoni, M., Monchalin, J.P., Perton, M., Blouin, A., Johnston, A., Cole, R., Barroeta-Robles, J., Buzaud, E. “Experimental Investigation of a Composite Behaviour Under Short Laser-Shock Loading”, From Sept 7th, 2010 to Sept 9th, 2010, SMT24, Dresden, Germany.
Gay, E., Berthe, L., Boustie, M., Arrigoni, M., Monchalin, J.P., Perton, M., Blouin, A., Johnston, A., Cole, R., Barroeta-Robles, J., Buzaud, E. “Experimental and Numerical Investigation of Composite Behaviour at High Strain Rate”. From Dec 1st, 2010 to Dec 3rd, 2010. DYMAT 2010, Strasbourg, France.
Perton M., Blouin, A., Gu, Z., Monchalin, J.P., Cole, R., Barroeta-Robles, J., Gay, E., Boustie, M., Berthe, L., Arrigoni, M. “Adhesive Bond Strength Evaluation in Composite Materials by Laser-Generated High Amplitude Ultrasound”, From July 5th, 2010 to July 8th, 2010, LU2010, Talence, France.
Perton M., Blouin A., Monchalin, J.P., Barroeta Robles, J., Sands, J.M., Cole, R., Johnston, A. “Proof Testing of Adhesive Bonding of Composites by Laser Shockwave”, From July 17th, 2011 to July 22nd, 2011, Review of Progress in Quantitative Nondestructive Evaluation, Burlington, VT, USA
Perton M., Blouin A., Monchalin, J.P., Barroeta Robles, J., Sands, J.M., Cole, R., Johnston, A. “Adhesive Bond Testing of Composites by Laser Shockwave” From Apr 26th, 2011 to Apr 27th, 2011, Canadian Aeronautics and Space Institute, Montreal, QC, Canada